Insights to run quality better.
Articles on QMS, compliance, audits, validation, and digital transformation for regulated industries.
20 articles in Oil & Gas
Alarm-to-Record Breaks On Hydrostatic Test Records Missing Gauge Calibration Evidence
Alarm-to-Record Breaks On Hydrostatic Test Records Missing Gauge Calibration Evidence. Floor stop rules, roles, and inspection questions for hydrostatic gauge calibration.
Read more →
Supplier Escape Patterns When Wellhead Serial Trace Breaks Across the Bill of Materials
Supplier Escape Patterns When Wellhead Serial Trace Breaks Across the Bill of Materials. Floor stop rules, roles, and inspection questions for wellhead serial BOM trace.
Read more →
Crude Samples That Sit on the Bench Past Hold Time Because the LIMS Clock Starts at Receipt Not at Draw
When LIMS starts hold time at receipt not at draw
Read more →
Wellsite Valve Lockouts Photographed on the Wrong Flange After Night Shift Handover
When lockout photos show the wrong flange after night shift handover
Read more →
Wellhead Sample Point Hold When the Tag and the Valve Disagree
A floor hold guide for oil gas teams when the record looks closed and the physical state is still open.
Read more →
Wellhead Integrity Holds: When Annulus Pressure Climbs After a Valve Stroke
Annulus climb after a stroke is a well-control event on paper even if flow is still contained. Hold further stroking until pressure is explained.
Read more →
Wellhead Annulus Pressure Holds: When the Tree Looks Tight and the Annulus Does Not
Sustained annulus pressure with a tight tree is a hold on the well, the last packer test, and adjacent wells on the pad.
Read more →
Wellhead Pressure Chart Gaps: Hold Rules When the Logger Drops a Shift
A missing hour on the wellhead logger is not a gap to interpolate. Reconstruct chart, handheld, and last calibration.
Read more →
Wellhead Valve Leak-Test Misses: Evidence After a Night Operator Swap
A missed leak test after a valve swap is a permit problem and a pressure-boundary problem in the same hour.
Read more →
Wellhead Pressure Gauge As-Found As-Left After a Night Alarm
Swapping a gauge without as-found as-left erases the alarm evidence. The work order has to carry both readings or the investigation starts over.
Read more →
H2S Monitor Bump Test Failures on Well Pads
A bump test that fails at the pad gate means the monitor cannot go to the wellhead. Log gas, lot, and result before anyone walks the pad.
Read more →
Pipeline Pig Receiver Residue Sampling in Oil and Gas
Pig receiver residue is process data. Sample it, label it, and tie it to the run ID before the receiver is washed out.
Read more →